Exibir código-fonte para CISCO

Configuração Trunck na porta de UPLINK:



 #telnet IP
 swm#configure terminal
 swm(config)#!                                                         
 swm(config)#interface gigabitEthernet0/22                             
 swm(config-if)#switchport mode trunk                                  
 swm(config-if)#switchport trunk native vlan 1                         
 swm(config-if)#!                         
 swm(config-if)#exit
 swm(config)#exit
 swm#copy running-config startup-config



Mudar senha enable:
 configure terminal
 enable secret senha

Mudar senha telnet
 roteador(config)#line vty 0 4
 roteador(config-line)#login
 roteador(config-line)#password xxx